- add back in after 0.42 is out? if yes: start implementing in -prefork
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@809 958fd67b-6ff1-0310-b445-bb7760255be9
then derive ids for connections and transactions from that via
simple counters.
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@785 958fd67b-6ff1-0310-b445-bb7760255be9
- the reporters poposed fix would have caused two messages for the client on
return(DENY, ...) or a really unknown command.
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@772 958fd67b-6ff1-0310-b445-bb7760255be9
Can't locate object method "new" via package "Qpsmtpd::Plugin::logging::warn"
(perhaps you forgot to load "Qpsmtpd::Plugin::logging::warn"?)
if plugin cannot be found in @plugin_dirs
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@762 958fd67b-6ff1-0310-b445-bb7760255be9
What happens is if you pause the connection (needed if you YIELD for something)
then the line-reading loop exits, and never gets back there unless the client
sends more data. If the client is an abuser (i.e. pipelines) then you might
never get back to the read loop.
(yes, this was a bitch to track down :-))
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@730 958fd67b-6ff1-0310-b445-bb7760255be9
Add _auth field to PollServer.
Make sure that check_earlytalker works with PollServer.
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@711 958fd67b-6ff1-0310-b445-bb7760255be9
Heavily based on:
From: Nick Leverton <nj@leverton.org>
To: qpsmtpd@perl.org
Subject: SMTPA
Date: Thu, 4 Jan 2007 12:08:16 +0000
Message-Id: <200701041208.17018@leverton.icritical.com>
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.3x@703 958fd67b-6ff1-0310-b445-bb7760255be9
Qpsmtpd::Plugins for more info. This can be used to disable (and re-
enable) loaded plugins for the current connection.
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.3x@700 958fd67b-6ff1-0310-b445-bb7760255be9
(intention is to check bits in that don't break anything, so we can
always return to a stable base)
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.3x@676 958fd67b-6ff1-0310-b445-bb7760255be9
Make child process pretty name optional for qpsmtpd-prefork.
Ignore rather than crash for uninstalled plugins.
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.3x@675 958fd67b-6ff1-0310-b445-bb7760255be9
plugin_dir is configured. Slightly worsens duplication of code with
plugin_dir() to continue avoiding infinite recursion.
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.3x@674 958fd67b-6ff1-0310-b445-bb7760255be9
Leverton <nj|@|leverton.org>. The inner _load_plugins() routine is changed to
load only a single plugin given a search path, and the (two) calls to it pass
in the configured list of plugin dirs. The non-module case of _load_plugin()
simply loops on the plugin dir list until a matching plugin file is found;
the first match stops the search for that plugin, regardless of success or
failure in loading it.
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.3x@671 958fd67b-6ff1-0310-b445-bb7760255be9
follow RFC's for multiline responses.
Patch from Brian Szymanski <ski-qpsmtpd@allafrica.com>
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.3x@664 958fd67b-6ff1-0310-b445-bb7760255be9
[stupid] MUA, but isn't implemented with existing auth plugins. Based on
patch from Brian Szymanski.
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.3x@660 958fd67b-6ff1-0310-b445-bb7760255be9
Add SSL encryption method to FROM: header line.
Add new tls_before_auth configuration to hide AUTH until TLS is established.
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.3x@645 958fd67b-6ff1-0310-b445-bb7760255be9
Greatly simplify Danga::Client due to no more need for line mode client
Update to latest Danga::Socket
Fix check_earlytalker to use new API
Fix Danga::DNS to use new API
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@643 958fd67b-6ff1-0310-b445-bb7760255be9
Fix "help" command when there's no "smtpgreeting" configured (the default)
(Thanks to Thomas Ogrisegg)
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.3x@642 958fd67b-6ff1-0310-b445-bb7760255be9
prepare for 0.32 -- plan release for next thursday
r4446@g5: ask | 2006-02-17 11:00:48 -0800
tag 0.32rc1
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.3x@615 958fd67b-6ff1-0310-b445-bb7760255be9
that you have to explicitely read from <STDIN> in order for IO::Socket::SSL
to correctly translate the data (i.e. reading from <> isn't sufficient).
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.3x@612 958fd67b-6ff1-0310-b445-bb7760255be9
Also made auth_vpopmail_sql be quieter about problems authenticating.
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@607 958fd67b-6ff1-0310-b445-bb7760255be9
SMTP.pm (the Auth.pm POD will get renamed to README.authentication).
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@605 958fd67b-6ff1-0310-b445-bb7760255be9
Patch by Hanno Hecker <hah@uu-x.de>.
Adds the RFC 1893 status codes to the messages which are returned to the
sending client.
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.3x@602 958fd67b-6ff1-0310-b445-bb7760255be9
By default no flags are set (old behaviour). Known flags for cleanup are
FLAG_FILTER, FLAG_BCC_OK and FLAG_MAP_OK, see POD for details.
Patch by: Hanno Hecker <hah@uu-x.de>
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.3x@600 958fd67b-6ff1-0310-b445-bb7760255be9
qpsmtpd-forkserver. This patch merges Peter's patch (with the possibilty
to DENY/DENSOFT the connection) and my first attempt. The --max-from-ip
check was moved from core to the hosts_allow plugin.
Patch by: Hanno Hecker <hah@uu-x.de>
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.3x@599 958fd67b-6ff1-0310-b445-bb7760255be9
* lib/Qpsmtpd/Connection.pm
Abstract out parameters which can be reused (e.g. TLS) or can be
set when creating the Connection object via start().
* plugins/tls
Simplify code to use $self->clone() construct and also suppress
IO::Socket::SSL debug noise, now that this is working.
* plugins/tls_cert
New file to automate creating self-signed certificates for TLS.
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.3x@597 958fd67b-6ff1-0310-b445-bb7760255be9
Attempt to fix callback occurring immediately by calling it via AddTimer
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@590 958fd67b-6ff1-0310-b445-bb7760255be9
more use of the "fd:#" code everywhere.
* lib/Qpsmtpd.pm
Default log method use '$self->fd()' instead of '$self->{fd}'.
Include a sub fd() method for inheritance purposes.
* lib/Qpsmtpd/PollServer.pm
Inherit log() from Qpsmtpd.pm (via SMTP.pm).
* lib/Qpsmtpd/Plugin.pm
Appropriate code allow plugins to inherit fd().
* plugins/dnsbl
Use log() instead of warn().
* plugins/logging/adaptive
plugins/logging/warn
Include the 'fd:#' to the log line if defined.
* qpsmtpd
Reorder things slightly so we can use log().
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@589 958fd67b-6ff1-0310-b445-bb7760255be9
Too many individual changes to document. Trust me... ;-)
Lightly tested (i.e. it accepts and delivers mail with minimal plugins).
NOTES/LIMITATIONS:
logging/adaptive currently eats some log messages.
auth_vpopmail_sql is currently broken (needs continuations?).
'make test' fails in dnsbl (no Test::Qpsmtpd::input_sock() method).
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@588 958fd67b-6ff1-0310-b445-bb7760255be9
rather than ->transaction() when passing to hook)
Merge some other changes from 0.31.1 branch
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@582 958fd67b-6ff1-0310-b445-bb7760255be9
Support a finished() callback as the readable() thing didn't work.
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@577 958fd67b-6ff1-0310-b445-bb7760255be9
from plugins/count_unrecognized_commands kicks in.
Several buffered lines are read and processed by
Danga::Client::process_read_buf() without checking if the socket was
closed. The attached patch seems to fix it.
-- Brian Grossman
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@571 958fd67b-6ff1-0310-b445-bb7760255be9
RFC-2821 Section 4.5.1 specifically requires <postmaster> (without
domain name) as a legal RCPT TO: address.
* t/qpsmtpd-address.t
Test the above.
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.31@560 958fd67b-6ff1-0310-b445-bb7760255be9
Add POD to describe how to use the objects. Make the addr_cmp
method private (no need to expose it).
* t/qpsmtpd-address.t
Include tests of overloaded comparison, including sorting.
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.31@559 958fd67b-6ff1-0310-b445-bb7760255be9
Don't overload '<=>' operator casually. Swap host/user portion
when comparing (makes it easy to sort by domain).
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.31@558 958fd67b-6ff1-0310-b445-bb7760255be9
Since we are already overloading stringify, we might as well
overload comparisons as well (this may be too simplistic a test).
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.31@557 958fd67b-6ff1-0310-b445-bb7760255be9
lib/Qpsmtpd/SMTP.pm
Take the AUTH method and put it in SMTP.pm where it belongs.
* lib/Qpsmtpd.pm
lib/Qpsmtpd/Plugin.pm
Expose the auth_user/auth_mechanism property to plugin writers.
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.31@556 958fd67b-6ff1-0310-b445-bb7760255be9
Fix fairly egregious error. If the size_threashold is smaller than
the body while writing, the file handle would be closed prematurely.
Ouch. I don't like it here from a stylistic point of view, but at
least it will actually work now.
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.31@553 958fd67b-6ff1-0310-b445-bb7760255be9
Convert objects to hash. Neuter parse() to wrapper around new().
Add overload stringify to $obj->format().
* t/qpsmtpd-address.t
Remove tests specific to parse(). Add test for overloaded "".
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.31@552 958fd67b-6ff1-0310-b445-bb7760255be9
IO::File is buffering the message, so that the AV software doesn't get a
a chance to scan anything when size_threshold > 0.
* qpsmtpd
Apparently no one is running tcpserver any longer, since it wasn't loading
the plugins anymore.
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.31@550 958fd67b-6ff1-0310-b445-bb7760255be9
By default, spool all messages to disk.
* config.sample/size_threshold
Provide minimal explanation for how to avoid spooling small messages.
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.31@549 958fd67b-6ff1-0310-b445-bb7760255be9
Don't try to load the plugins if they are already loaded.
* lib/Qpsmtpd/Transaction.pm
Get the size_threshold by inheritance.
Extract the spooling of the body as a new sub.
Always spool the body when calling body_filename().
Compare the body_size to the cached size_threshold.
* lib/Qpsmtpd.pm
Cache the size_threshold and provide an accessor method.
* qpsmtpd-forkserver
Initialize both the spool_dir and size_threshold caches before forking.
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.31@547 958fd67b-6ff1-0310-b445-bb7760255be9
an explicit $QPSMTPD_CONFIG variable to specify where the config lives,
overriding $QMAIL/control and /var/qmail/control if set. The usual "last
location with the file wins" rule still applies.
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.31@529 958fd67b-6ff1-0310-b445-bb7760255be9
Fix test failures due to hook renames
Fix redefined warnings due to hook renames
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@507 958fd67b-6ff1-0310-b445-bb7760255be9
r588@jpeacock (orig r490): jpeacock | 2005-07-09 07:03:53 -0400
r547@jpeacock: jpeacock | 2005-07-02 07:20:17 -0400
Replace pithy comment with something more neutral.
Thanks Gordon Rowell <gordonr@gormand.com.au>
r548@jpeacock: jpeacock | 2005-07-02 07:24:21 -0400
Example patterns for badrcptto plugin - Gordon Rowell <gordonr@gormand.com.au>
r586@jpeacock: jpeacock | 2005-07-09 06:54:47 -0400
Don't use varlog() directly unless you are passing all parameters.
Don't try to log() anything during loading of logging plugins.
r587@jpeacock: jpeacock | 2005-07-09 06:59:57 -0400
Cannot use new-style hooking with logging plugins (yet).
r590@jpeacock (orig r491): jpeacock | 2005-07-10 06:56:55 -0400
r589@jpeacock: jpeacock | 2005-07-10 06:54:32 -0400
Track hooks as array and hash.
Re-revert changes to logging plugins to use new-style hooking.
logging/adaptive assumed that register() has been called before hook_logging.
git-svn-id: https://svn.perl.org/qpsmtpd/branches/0.31@503 958fd67b-6ff1-0310-b445-bb7760255be9
Track hooks as array and hash.
Re-revert changes to logging plugins to use new-style hooking.
logging/adaptive assumed that register() has been called before hook_logging.
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@491 958fd67b-6ff1-0310-b445-bb7760255be9
Replace pithy comment with something more neutral.
Thanks Gordon Rowell <gordonr@gormand.com.au>
r548@jpeacock: jpeacock | 2005-07-02 07:24:21 -0400
Example patterns for badrcptto plugin - Gordon Rowell <gordonr@gormand.com.au>
r586@jpeacock: jpeacock | 2005-07-09 06:54:47 -0400
Don't use varlog() directly unless you are passing all parameters.
Don't try to log() anything during loading of logging plugins.
r587@jpeacock: jpeacock | 2005-07-09 06:59:57 -0400
Cannot use new-style hooking with logging plugins (yet).
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@490 958fd67b-6ff1-0310-b445-bb7760255be9
The great plugin renaming in the name of inheritance and standardization commit.
1. new concept of standard hook_ names.
2. Plugin::init
3. renamed many subroutines in plugins (and cleaned up register subs)
4. updated README.plugins
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@479 958fd67b-6ff1-0310-b445-bb7760255be9
Re-order plugin docs to appear in the order things generally get called
Fix SMTP.pm to reflect what's documented in README.plugins :-)
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@471 958fd67b-6ff1-0310-b445-bb7760255be9
From: hjp@hjp.at
Subject: PATCH: Return 421 if we are going to disconnect
Date: July 3, 2005 1:23:21 PM PDT
To: qpsmtpd@perl.org
RFC 2821 says we should return 421, if we disconnect, not 450 or 451.
hp
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@459 958fd67b-6ff1-0310-b445-bb7760255be9
various small tweaks
the README really could use some updating; yikes!
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@457 958fd67b-6ff1-0310-b445-bb7760255be9
check_earlytalker updated to use timers
Few other code cleanups to make sure check-earlytalker is fully working
git-svn-id: https://svn.perl.org/qpsmtpd/branches/high_perf@441 958fd67b-6ff1-0310-b445-bb7760255be9
There's a hole in my bucket, dear Liza, a hole.
Go fix it, dear Henry, dear Henry, dear Henry.
Go fix it, dear Henry, dear Henry, fix it.
With what shall I fix it, dear Liza ... with what?
With a patch from Joe Schaefer, dear Henry ... with a patch.
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@434 958fd67b-6ff1-0310-b445-bb7760255be9
Create a single Qpsmtpd::TcpServer object in the parent process and
then rely on fork to let each child have it's own copy
* lib/Qpsmtpd/Plugin.pm
Add new pre-connection and post-connection hooks
* README.plugins
Document the above new hooks
* lib/Qpsmtpd.pm
No longer have local value for trace_level() the first time through, which
was masking the global value (due to stupid search/replace error).
Don't call log() from trace_level() since it is only ever called from
within the varlog() sub when no logging plugin is registered.
* plugins/dnsbl
Config line option to use DENY_DISCONNECT instead of DENY (since any IP
on a blacklist should not have a chance to send anything for now).
Add POD to document the new disconnect behavior
* lib/Qpsmtpd.pm
Compatibility changes so test files continue to work
* t/Test/Qpsmtpd.pm
Compatibility sub for core subs which call varlog() directly
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@428 958fd67b-6ff1-0310-b445-bb7760255be9
can signal "our" EventLoop to return. To ensure we wait the full time, we
must loop around until the end condition is truly satisfied.
git-svn-id: https://svn.perl.org/qpsmtpd/branches/high_perf@425 958fd67b-6ff1-0310-b445-bb7760255be9
Brian Grossman).
update changes file with all (?) changes since 0.29
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@411 958fd67b-6ff1-0310-b445-bb7760255be9
Fix some totally egregious spelling errors
* plugins/auth/auth_ldap_bind
New plugin to authenticate against an LDAP database
Thanks to Elliot Foster <elliotf@gratuitous.net>
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@404 958fd67b-6ff1-0310-b445-bb7760255be9
representation from the numeric (for logging purposes). Add new logging
plugin, logging/adaptive, which logs at different levels depending on
whether the message was accepted/rejected.
* lib/Qpsmtpd/Constants.pm
use hashes for storing return_codes and log_levels
export accessor methods to retrieve the text representations
* lib/Qpsmtpd.pm
Rename log_level() to trace_level() so as to not conflict with the same
name in Qpsmtpd::Constants.
Call return_code() to display the text form when logging
* plugins/logging/adaptive
Better documentation
Support named parameters and prefix
Call return_code() to display the text form when logging
* plugins/logging/warn
Include POD
* README.logging
First pass at documenting the logging plugin API
* config.sample/loglevel
New numbering scheme to map directly to syslog levels
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@401 958fd67b-6ff1-0310-b445-bb7760255be9
existing core code. Add OK hook.
* lib/Qpsmtpd.pm
(init_logger): replaced with log_level()
(load_logging): NEW - load logging plugins without calling log()
(log_level): NEW - set/get global $LogLevel scalar
(log): now just a wrapper for varlog(); called only by core code
(varlog): initializes logging if not already done, calls logging plugins
in turn and falls back to interal logging unless plugins OK or DECLINED
(_load_plugins): only display "Loading plugin" when actually loading one
(run_hooks): load logging plugins without calling log(); add OK hook as
else of the DENY* case
(spool_dir): use global $Spool_dir scalar to cache location
* lib/Qpsmtpd/Plugin.pm
(%hooks): add "logging" and "ok"
(register_hook): add local _hook to object cache
(log): call varlog() with additional parameters hook and plugin_name
except for logging hook
(compile): add accessor sub for local _hook scalar
* lib/Qpsmtpd/SMTP.pm
(mail, rcpt): change loglevel to LOGALERT instead of LOGWARN for from/to
* qpsmtpd-forkserver
(REAPER): use package ::log() instead of warn()
(main): defer calling log until $plugin_loader has been initialized
(log): call logging using the $plugin_loader object
* plugins/logging/warn
NEW: sample plugin which replicates the core logging functionality
* plugins/logging/devnull
NEW: sample plugin which logs nothing (for testing multiple logging
plugin functionality)
* config.sample/logging
sample configuration file for logging plugins
* plugins/virus/uvscan
plugins/virus/clamav
Increase loglevel for non-serious warnings to LOGWARN from LOGERROR
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@398 958fd67b-6ff1-0310-b445-bb7760255be9
from the Danga project. This way we get something stable that we know works,
plus nobody has to go and track down other libraries.
Note that only Danga::Socket is (C) Danga. Everything else is original code
and (C) Matt Sergeant.
git-svn-id: https://svn.perl.org/qpsmtpd/branches/high_perf@387 958fd67b-6ff1-0310-b445-bb7760255be9
Use package lexical to cache spool dir location instead of storing in
Transaction or other high level object
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@376 958fd67b-6ff1-0310-b445-bb7760255be9
Copy all lines of incoming message to spool file and keep track of
where the body lines started (ease use of inplace scanning for
viruses).
* lib/Qpsmtpd/Transaction.pm
New function body_start() to get/set the body in spool file
Tweak body_resetpos() and body_getline() to use body_start instead of 0
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@375 958fd67b-6ff1-0310-b445-bb7760255be9
make it easier for plugins to manage temporary workspace. Also add POD and
tests for the new functions. Still need to add tests to the temp_*() calls
from a plugin.
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@369 958fd67b-6ff1-0310-b445-bb7760255be9
o plugins/check_badmailfromto
- New plugin in the style of check_badmailfrom, which matches a pair
of FROM/TO and makes it seem like the recipient's address no longer
exists (but only from the matching sender's point of view). Useful
for stalkers and other harassment cases.
o plugins/dns_whitelist_soft
- New plugin to provide a DNS-based whitelist (good for distributed
sites).
o various files
- Replaced tab character with 8 spaces and adjusted line breaks for
better readability.
Changes by mct@toren.net (Michael C. Toren)
o lib/Qpsmtpd/SMTP.pm
- Assumes a MAIL FROM value of "<#@[]>" (utilized by qmail to
indicate a null sender when generating a doublebounce message)
is equivalent to "<>". Previously qpsmtpd complained that the
value could not be parsed.
- Adds LOGIN to the default list of supported auth mechanisms.
The documentation in Auth.pm indicated that auth-login was not
currently supported due to lack of functionality, however I can
confirm that LOGIN appears to work fine as tested by using msmtp
(http://msmtp.sourceforge.net/). Are there any indications that
LOGIN support is actually broken in the current implementation?
- Removes the "X-Qpsmtpd-Auth: True" header appended when a message
has been sent by an authenticated user. One problem with such a
header is that it's impossible to say which SMTP hop added it,
and it provides no information which could be used to backtrack
the transaction. I grepped through my mail archives a bit
looking for how other MTAs handled the problem, and decided it
would be best to place this information in the Received: header:
Received: from remotehost (HELO remotehost) (192.168.42.42)
(smtp-auth username foo, mechanism cram-md5)
by mail.netisland.net (qpsmtpd/0.28) with ESMTP; <date>
o lib/Qpsmtpd/Auth.pm:
- Documentation update for the arguments passed to an auth
handler; previously the $mechanism argument was not mentioned,
which threw off the argument offsets.
- Documentation update for auth-login removing the warning
that auth-login is not currently supported due to lack of
functionality.
- Fix to execute a generic auth hook when a more specific
auth-$mechanism hook does not exist. (Previously posted
to the list last week.)
- Upon authentication, sets $session->{_auth_user} and
$session->{_auth_mechanism} so that SMTP.pm can include them
in the Received: header.
o plugins/queue/qmail-queue
- Added a timestamp and the qmail-queue qp identifier to the
"Queued!" 250 message, for compatibility with qmail-smtpd, which
can be very useful for tracking message delivery from machine to
machine. For example, the new 250 message might be:
250 Queued! 1105927468 qp 3210 <1105927457@netisland.net>
qmail-smtpd returns:
250 ok 1106546213 qp 7129
Additionally, for consistency angle brackets are placed around
the Message-ID displayed in the 250 if they were missing in the
message header.
o plugins/check_badmailfrom:
- Changed the error message from "Mail from $bad not accepted
here" to "sorry, your envelope sender is in my badmailfrom
list", for compatibility with qmail-smtpd. I didn't see any
reason to share with the sender the value of $bad, especially
for situations where the sender was rejected resulting from a
wildcard.
o plugins/check_earlytalker:
o plugins/require_resolvable_fromhost:
- No longer checks for earlytalkers or resolvable senders if the
connection note "whitelistclient" is set, which is nice for
helping backup MX hosts empty their queue faster.
o plugins/count_unrecognized_commands:
- Return code changed from DENY_DISCONNECT, which isn't valid in
an unrecognized_command hook, to DENY, which in this context
drops the connection anyway. (Previously posted to the list
last week.)
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@356 958fd67b-6ff1-0310-b445-bb7760255be9
- move some things to more appropriate levels
- make 'running plugin' more interesting
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@348 958fd67b-6ff1-0310-b445-bb7760255be9
Change subdomain regex to match single character subdomains
(Robert Spier)
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@332 958fd67b-6ff1-0310-b445-bb7760255be9
* lib/Qpsmtpd/Transaction.pm
Forgot to nuke POD for deprecated relaying()
* plugins/auth/auth_vpopmail_sql
Log who actually AUTHenticated
* plugins/virus/uvscan
Don't need to unlink the file (Qpsmtpd will take care of it)
Log the machine that did the actual Antivirus scanning
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@329 958fd67b-6ff1-0310-b445-bb7760255be9
* plugins/rcpt_ok
Split check_relay into two plugins
* config/plugins
Reorder plugins to take advantage of the new check_relay
* lib/Qpsmtpd/Connection.pm
Add support for relay_client() method
* lib/Qpsmtpd/SMTP.pm
Copy connection relay settings to transaction object when created
* lib/Qpsmtpd/Auth.pm
Use the connection->relay_client() instead of setting an env var
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@326 958fd67b-6ff1-0310-b445-bb7760255be9
Call deny plugin for _DISCONNECT constants.
Make Plugin.pm %hooks a global rather than lexical so we can do evil things later.
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@320 958fd67b-6ff1-0310-b445-bb7760255be9
asking each plugin to register. There is slightly more overhead this way,
but it feels more correct, and we can fix the overhead later in a more clean
way.
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@300 958fd67b-6ff1-0310-b445-bb7760255be9
<knan at mo.himolde.no>)
make the maildir plugin record who the message was to (needs some improvements
still)
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@277 958fd67b-6ff1-0310-b445-bb7760255be9
From: John Peacock <jpeacock@rowman.com>
Yeah, I was just noticing how odd it was that FROM was always logged
but TO wasn't logged at all.
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@268 958fd67b-6ff1-0310-b445-bb7760255be9
To: qpsmtpd@perl.org
Subject: [PATCH] Another helper function to Qsmtpd::Transaction
Message-ID: <20040714143407.32740.qmail@onion.perl.org>
Date: Wed, 14 Jul 2004 10:34:25 -0400
The AV scanner plugin I am currently using (uvscan) requires the
attached patch so that it can scan the existing temp file, rather than
making a copy just for the scan.
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@267 958fd67b-6ff1-0310-b445-bb7760255be9
improve address parsing a bit to make it easier to add parsing of MAIL
FROM extensions
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@263 958fd67b-6ff1-0310-b445-bb7760255be9
Replace Mail::Address with Peter J. Holzer's Qpsmtpd::Address module.
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@261 958fd67b-6ff1-0310-b445-bb7760255be9
Include the date and time the session started in the process status line.
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@233 958fd67b-6ff1-0310-b445-bb7760255be9
+
+ Fix warning in check_badrcptto plugin (Thanks to Robert James Kaes)
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@230 958fd67b-6ff1-0310-b445-bb7760255be9
the Transaction objects DESTROY method is called. (Thanks to Robert
James Kaes <rjkaes@flarenet.com>)
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@207 958fd67b-6ff1-0310-b445-bb7760255be9
persistent environments as previously queue/qmail-queue would be recompiled
for every mail)
git-svn-id: https://svn.perl.org/qpsmtpd/trunk@177 958fd67b-6ff1-0310-b445-bb7760255be9
